1937-1948 Ford Polished Stainless Steel Steering Arms w 3 3/4" Drop For use with spring-over front axles ONLY. Should NOT be used with spring-behind front axle assembly. Flat plate arms are required when using a spring-behind front axle. Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.
These forged steel steering arms will attach to all 1937-48 Ford spindles but their greater drop, 3-3/4" from spindle mount holes means they work best on 1935-48 Ford cars (with spring-over front axle). Clears most radius rods and wishbones. These steering arms accept 11/16" Ford 7 degree "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends. The 3-3/4" drop is measured from the center of the threaded spindle mount holes to the bottom of the arm. The mounting bolt holes have 3-3/8" eye-to-eye centers.
Ford 1928-1948 Steel Straight Axle Spindles sold in pair Description:Application:These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford kingpins. They fit Ford axles from '28-'48 and can be used with period correct drum brakes. but will not work with hubs from '28-'36.100% brand new Ford spindles.The spindles come in a pair.Forged one piece .Steel Straight Axle Spindle Package including all items in the picture
