Best Selling

Application:

--Designed for 1967-1969 Camaro, Firebird1968-1974 Chevy Nova1971-1974 Pontiac Ventura1973-1974 Buick Apollo1973-1974 Oldsmobile Omega

Description:

--A set of upper and lower heavy duty tubular control arms.tubular control arms are significantly stronger than stock.

--Fit any A Body GM car

--They provide additional built in positive caster which improves your handling ability. They will improve your suspension geometry.

--Urethane bump stops are included to provide ball joint protection at full drop.

--The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.

--They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements

--Upper arms are 1.125" OD - .125" Wall Tubing

--Lower arms are 1.625" OD - .156" DOM Tubing

--The upper arms have 4 degrees of positive caster.The lower arms are set at stock caster

--Lower arms with poly urethane bumpers

Material: Made of high quality aluminum alloy, sturdy and durable.

Specification: Stroke Length = 200mm(8"); Retracted length = 308mm(12.13"); Extended Length= 510mm(20.13"); Travel speed = 12 mm/s; Maximum current draw = 4.6 Amps; Maximum Dynamic Load = 225 lbs (900N)

Low noise: silent and stable, make sound lower than 50db, suitable for many situations.

Waterproof: IP55 Rated protection sealed against dust, water, and corrosion suitable for outdoors use.

Wide Applications: Commonly Used in Automotive, home furniture, medical devices, industrial construction and agricultural machineries.

Specification:

Maximum current draw = 4.6 Amps

Maximum Dynamic Load = 225 lbs (900N)

Maximum Static Load = 600 lbs

Retracted length: 12.13"(308mm)

Extended length: 20.13"(510mm)

Diameter of Mounting hole: 0.256"(6.5mm)

Diameter of Shaft: 0.79"(20mm)

Stroke Length: 8 inches

Travel speed: 12 mm/s

Designed for
1968-1972 Chevy Chevelle,
1968-1972 Chevy Monte Carlo,
1968-1972 Chevy Malibu,
1968-1972 Chevy El Camino,
1968-1972 Pontiac GTO,
1968-1972 Pontiac Tempest,
1968-1972 Pontiac LeMans,
1968-1972 Oldsmobile Cutlass.
This auction is for a set of upper and lower heavy duty tubular control arms.
They are significantly stronger than stock.
Fit any A Body GM car
Suspension geometry is improved over stock by increasing camber gain and improving roll camber.
These control arms are redesigned for better steering and suspension.
They utilize bleeding-edge manufacturing processes which include mandrel bends and precision cnc welding.
The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.
They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements
The upper control arms also utilize greaseable bushings which make for increased stiffness over stock to provide more consistent and precise handling.
The tubular lower control arms replace stock lower control arms.
Upper arms are 1.125" OD - .125" Wall Tubing.And have 4* Positive Caster.
Lower arms are 1.625" OD - .156" DOM Tubing.
And are Set at Stock Caster
The conventional lower coil spring pocket features a stamped steel pocket with a positive spring locating feature and nutserts for the shock lower attachment.
Lower arms with poly urethane bumpers AND spring cushions

--Polished aluminum, in between the fins are polished.

--This is a new polished aluminum 11-7/8" x 8-1/4" x 3" oval air cleaner kit.

--Polished Aluminum Half Finned Style Top.

--Aluminum raised base to raise the air cleaner above the carb flange.

--Stainless bolt for mounting included.

--Meets the requirement for most stock and aftermarket carburetors with a 5 1/8'' diameter carb neck. Like most Carter, Edelbrock, Holley, Rochester, and Quadrajet four barrel carburetors.

--Note:If item's diameter is too small to fit Carb Base, some grinding work might be involved.

--Package: Including all items in the picture.

Note: Professional Installation is Highly Recommended.

Fitment:

1955-1957 Chevrolet Bel Air

1955-1957 Chevrolet One-Fifty

1955-1957 Chevrolet Two-Ten

DESCRIPTION

Available for: 1955-57 Chevy Belair - 150 - 210

These Control Arms Are CAD designed Mandrel Bent and all components are either laser cut or CNC machined for exact tolerances.

Suspension geometry is improved

Urethane bump stops to provide ball joint protection at full drop

These arms are stronger than the Factory Control arms

The special cam plugs will allow for more caster adjustment. Gives vehicle a higher speed stability.

The lowers are stock while the upper arms have 4 degrees of positive caster.

Modifications are not required for install.

These arms will work with stock coil springs & coil overs.

For a bind free operation, there is low drag and self lubricating properties

The bushings won't squeak and are high-wearing.

Powder Coated

There is an additional built-in positive caster that will improve your handling

For less deflection provided by the huge tube design

Complete Factory replacement

Package: Including all items in the picture.

Note: Professional Installation is Highly Recommended.

Material: Made of high quality aluminum alloy, sturdy and durable.

Specification: Stroke Length = 200mm(8"); Retracted length = 308mm(12.13"); Extended Length= 510mm(20.13"); Travel speed = 12 mm/s; Maximum current draw = 4.6 Amps; Maximum Dynamic Load = 225 lbs (900N)

Low noise: silent and stable, make sound lower than 50db, suitable for many situations.

Waterproof: IP55 Rated protection sealed against dust, water, and corrosion suitable for outdoors use.

Wide Applications: Commonly Used in Automotive, home furniture, medical devices, industrial construction and agricultural machineries.

Specification:

Maximum current draw = 4.6 Amps
Maximum Dynamic Load = 225 lbs (900N)
Maximum Static Load = 600 lbs
Retracted length: 12.13"(308mm)
Extended length: 20.13"(510mm)
Diameter of Mounting hole: 0.256"(6.5mm)
Diameter of Shaft: 0.79"(20mm)
Stroke Length: 8 inches
Travel speed: 12 mm/s

Description:

Input Voltage: 12VDC

Stroke length: 6 inches (150mm)225 Pound

Max Lift.Speed: 12mm/Second.

Retracted length: 10.13"(257mm)

Extended length: 16.13"(409mm)

Diameter of Mounting hole: 0.256"(6.5mm)

Diameter of Shaft: 0.79"(20mm)Wiring included, pre-installed.Built-in clutch prevents over-extending and over-compressing.

Note:Professional Installation is Highly Recommended (No Instruction and Wiring Diagram Included)Comes with all items in the picture.

Brand new 1"DD X 3/4" DD Chrome steel universal steering joint.
This U-Joints is made from polished Chrome steel and is used to connect a 3/4" DD steering shaft to most aftermarket columns.
The fastener is designed for better attachment and upgraded safety.
They use a high quality needle bearing and have a working angle of up to 38 degrees.

Application:
Designed for small block Chevy engines 283, 305, 327, 350 and 400 manufactured before 1986.
Description:
Price is for the pair.
Polished finish.
These valve covers measure 3" for inside height in the center and 2.5" inside height on the ends. Overall height is 3.5"Looks great on hot rods, muscle cars, camaro, nova, chevelle, 55-57, pickup truck, corvette, etc.
These are the best quality valve covers we have seen in this style!
Valve covers come complete with baffles and screws as pictured.
Included are the valve cover bolts (chrome allen head with washers).
Included are 2 grommets for breathers.
Very heavy aluminum (not light like others out there).
Excellent quality gasket rail - will seal nicely. Note: Package without valve covers gasket!

Description:

Retracted length: 12.13"(308mm)

Extended length: 20.13"(510mm)

Diameter of Mounting hole: 0.256"(6.5mm)

Diameter of Shaft: 0.79"(20mm)

Linear actuators are actuators which create motion in a straight line.Unlike a motor, which creates circular motion, a linear actuator can be used with any application that requires moving something in a straight line.

Demotor Linear Actuators are a powerful and reliable linear actuator for small to medium loads.We designed our linear actuator with pre-lubricated metal gears, pre-installed limit switches, and with an IP65 (suitable for outdoor use) water resistance rating.

Note:Professional Installation is Highly Recommended (No Instruction and Wiring Diagram Included)Comes with all items in the picture.

--Universal Steering U Joint 3/4" DD to 3/4" DD Chrome Steel.

--Premium quality needle bearing

--This new style of U-joint combines strength, safety, and cost effectiveness.

Note: Professional Installation is Highly Recommended.

Application: --Universal style Description: --Tank measures 20" (L) x 24" (W) x 10" (H)--Mounting Tabs Measure 21-3/4" (L) x 21-1/2" (W) Center to Center --Dual -10 Outlets --Dual -10 Vent Outlets (Top Of Cell) --Sump Measures 6" x 6" x 2" Deep --Quick Release Fuel Cap --0-90 Ohm Fuel Sender --Dry Weight A Mere 18lb 11oz --Includes Anti-slosh foam
--Professional Installation is Highly Recommended (No Instruction and Wiring Diagram Included)

--Fit for Small Block Ford 289 302 5.0L engines up to 1993

--Type:Alternator Bracket Kit

--Material:Aluminum

--Surface Finish: Polished

--Adjustable and Light-Weight Design

--CNC Machine for Resistance Against Pressure and Corrosion

--Mounts on upper passenger side.

--90°water neck required.Bracket kit can be used with serpentine& V belt applications

--Works with drivers side lower radiator hose only.

--Package: Including all items in the picture.

Professional Installation is Highly Recommended.Installation Instruction is NOT Included

Finned Polished Aluminum Valve Cover Pcv Valve & Breather

Highly Polished Billet Aluminum Pcv Valve & Breather.

Measures: 4" Long X 2 1/4" Wide X 2" Tall Each

You Will Receive Exactly As Pictured 1 Finned Pcv & 1 Finned Breather

1" Tube For 1 1/4" Holes In Valve Covers

These Are An Extremely Tight Fit Into Valve Covers, Use A Little Oil When Installing.

Tight Fit Ensures The Pcv Will Not Turn Or Come Out When Engine Is Running.

Package: including all items in the picture.

Note: Professional Installation is Highly Recommended. Installation Instruction is NOT Included.

Application:

--Fits for all, not special to some or other

Description:

-- Manual 32" Steering Column

--Chrome finish

--Without key

--Works for manual

--Without ignition switch in the column

--2" Column diameter

--1" DD Output shaft

--Total length is 32" to steering wheel flange

--With a 9-hole style adapter.

Package:--A brand new steering column & 9-hole adapter + all accessories

Note:--Professional Installation is Highly Recommended (No Instruction and Wiring Diagram Included).

Brake Booster

Application:Universal style

Description:

--The booster will bolt up to most street rods, hot rods, and many other vehicles .

--It also offers approximately 20% (some say up to 27%) more stopping power.

--Standard 2 bolt brake master cylinder on top.

--Has 4 bolts on bottom that mount to the firewall with 3 3/8" spacing.

Master Cylinder
GM Chrome Aluminum Brake Master Cylinder w/ Screw Down Style Finned Cap 1" Bore
Application: --Fits most GM application.
Description:
--100% brand new,high performance
--High quality ,chrome aluminum finish
--Finned Cap
--With a 1" bore
--The cap is attached by 2 small screws
--9/16" and 1/2" ports on both sides of the master cylinder
--4 port unit,so you can mount your lines on either side
--will work with any drum/drum, disc/drum or disc/disc setup
--Plugs are included to block the ports

Application:
--Fits for all, not special to some or other.
Description:
--Manual 28"(measured from bottom of shaft to top of shroud )Steering Column.
--Chrome finish.
--Without key.
--Works for manual transmission.
--Without ignition switch in the column.
--2" Column diameter.
--1" DD Output shaft.
--with a 9 bolt style steering wheel adapter.