Control Arms & Parts

Application:

--Designed for 1967-1969 Camaro, Firebird1968-1974 Chevy Nova1971-1974 Pontiac Ventura1973-1974 Buick Apollo1973-1974 Oldsmobile Omega

Description:

--A set of upper and lower heavy duty tubular control arms.tubular control arms are significantly stronger than stock.

--Fit any A Body GM car

--They provide additional built in positive caster which improves your handling ability. They will improve your suspension geometry.

--Urethane bump stops are included to provide ball joint protection at full drop.

--The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.

--They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements

--Upper arms are 1.125" OD - .125" Wall Tubing

--Lower arms are 1.625" OD - .156" DOM Tubing

--The upper arms have 4 degrees of positive caster.The lower arms are set at stock caster

--Lower arms with poly urethane bumpers

Designed for
1968-1972 Chevy Chevelle,
1968-1972 Chevy Monte Carlo,
1968-1972 Chevy Malibu,
1968-1972 Chevy El Camino,
1968-1972 Pontiac GTO,
1968-1972 Pontiac Tempest,
1968-1972 Pontiac LeMans,
1968-1972 Oldsmobile Cutlass.
This auction is for a set of upper and lower heavy duty tubular control arms.
They are significantly stronger than stock.
Fit any A Body GM car
Suspension geometry is improved over stock by increasing camber gain and improving roll camber.
These control arms are redesigned for better steering and suspension.
They utilize bleeding-edge manufacturing processes which include mandrel bends and precision cnc welding.
The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.
They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements
The upper control arms also utilize greaseable bushings which make for increased stiffness over stock to provide more consistent and precise handling.
The tubular lower control arms replace stock lower control arms.
Upper arms are 1.125" OD - .125" Wall Tubing.And have 4* Positive Caster.
Lower arms are 1.625" OD - .156" DOM Tubing.
And are Set at Stock Caster
The conventional lower coil spring pocket features a stamped steel pocket with a positive spring locating feature and nutserts for the shock lower attachment.
Lower arms with poly urethane bumpers AND spring cushions

Fitment:

1955-1957 Chevrolet Bel Air

1955-1957 Chevrolet One-Fifty

1955-1957 Chevrolet Two-Ten

DESCRIPTION

Available for: 1955-57 Chevy Belair - 150 - 210

These Control Arms Are CAD designed Mandrel Bent and all components are either laser cut or CNC machined for exact tolerances.

Suspension geometry is improved

Urethane bump stops to provide ball joint protection at full drop

These arms are stronger than the Factory Control arms

The special cam plugs will allow for more caster adjustment. Gives vehicle a higher speed stability.

The lowers are stock while the upper arms have 4 degrees of positive caster.

Modifications are not required for install.

These arms will work with stock coil springs & coil overs.

For a bind free operation, there is low drag and self lubricating properties

The bushings won't squeak and are high-wearing.

Powder Coated

There is an additional built-in positive caster that will improve your handling

For less deflection provided by the huge tube design

Complete Factory replacement

Package: Including all items in the picture.

Note: Professional Installation is Highly Recommended.

Description£º
Applications:
1965-1970 Chevy Impala
1965-1970 Chevy Bel Air
1965-1970 Chevy Biscayne
1969-1970 Chevy Brookwood
1966-1970 Chevy Caprice
A Set of Brand New Tubular Lower Control Arms, 1 Left Side & 1 Right Side, with Bushings, Ball Joints, and Coil Spring Inserts
Bushings mount in stock locations & ball joints fit in stock spindles. Polyurethane inserts locate the coil springs correctly and helps isolate suspension noise. The inserts are made to accept the coil spring ends. They will rotate as well, which enables them to accept ends of springs, even if the springs have been taken out and re-positioned, or cut. These arms are the perfect compliment to any race car, hot rod, or restoration
Package: Including all items in the picture.
Note: Professional Installation is Highly Recommended.

Application:

Designed for :1967-1969 Camaro, Firebird1968-1974 Chevy Nova1971-1974 Pontiac Ventura1973-1974 Buick Apollo1973-1974 Oldsmobile Omega

Description:

--This auction is for a set of lower heavy duty tubular control arms.tubular control arms are significantly stronger than stock.

--Fit any A Body GM car

--They provide additional built in positive caster which improves your handling ability. They will improve your suspension geometry.

--Urethane bump stops are included to provide ball joint protection at full drop.

--The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.

--They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements

--Lower arms are 1.625" OD - .156" DOM Tubing

--Lower arms with poly urethane bumpers

Application:
--1964-1972 Chevelle, Malibu, Monte Carlo and El Camino
--1964-1972 Lemans, Grand Am, Grand Lemans, GTO, T37 and Tempest
--1969-1972 Grand Prix
--1970-1972 Sprint Trucks
--1966-1972 4-4-2, Cutlass, Calais, F85 and Vista Cruiser
--1964-1972 Skylark, Century, Special, Luxus and Regal
Discription:
--This auction is for a set of lower heavy duty tubular control arms.They are significantly stronger than stock.
--Fit any A Body GM car
--Suspension geometry is improved over stock by increasing camber gain and improving roll camber. These control arms are redesigned for better steering and suspension.
--They utilize bleeding-edge manufacturing processes which include mandrel bends and precision cnc welding.
--The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.
--They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements
--Lower arms are 1.625" OD - .156" DOM Tubing.And are Set at Stock Caster
--The conventional lower coil spring pocket features a stamped steel pocket with a positive spring locating feature and nutserts for the shock lower attachment.

--Designed for 1955-57 Chevy Belair - 150 - 210

--Suspension geometry is improved

--Urethane bump stops to provide ball joint protection at full drop

--These arms are stronger than the Factory Control arms

--The special cam plugs will allow for more caster adjustment. Gives vehicle a higher speed stability.

--Modification is not required for installation.

--These arms will work with stock coil springs & coil overs.

--For a bind free operation there is low drag and self lubricating properties

--The bushings won't squeak and are high wearing.

--Control arms include new hardware

--Powder Coated

--There is additionally built in positive caster that will improve your handling

--For less deflection provided by the huge tube design

--Complete Factory replacement

--Upper arms are 1.125" OD -.125" Wall Tubing. Lower arms are 1.625" OD - .156" DOM Tubing

--Modifications Required: No

--Control Arm Material: DOM Tubing

--Upper Cross Shafts Included. Improved Positive Caster

--Ball Joint Quantity:  Two

--Control Arm Finish: Black Powder Coated

--Includes: Upper Deluxe Control Arms

--Package: Including all items in the picture.

Note: Professional Installation is Highly Recommended.

Application:

--Designed for 1967-1969 Camaro, Fire bird1968-1974 Chevy Nova1971-1974 Pontiac Ventura1973-1974 Buick Apollo1973-1974 Oldsmobile Omega

Description:

--This auction is for a set of upper heavy duty tubular control arms.tubular control arms are significantly stronger than stock.

--Fit any A Body GM car

--They provide additional built in positive caster which improves your handling ability. They will improve your suspension geometry.

--Urethane bump stops are included to provide ball joint protection at full drop.

--The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.

--They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements

--Upper arms are 1.125" OD - .125" Wall Tubing

--The upper arms have 4 degrees of positive caster.The lower arms are set at stock caster

Description£º
Applications:
1965-1970 Chevy Impala
1965-1970 Chevy Bel Air
1965-1970 Chevy Biscayne
1969-1970 Chevy Brookwood
1966-1970 Chevy Caprice
A Set of Brand New Tubular Upper Control Arms, 1 Left Side & 1 Right Side, with Shafts, Ball Joints, & Bumpers
Shafts mount in stock locations & ball joints fit in stock spindles. They can be used with stock or 2" drop spindles. The arms have caster built-in to the arms, which helps provide straight-line stability. This will also give better handling and less tire wear.
These arms are the perfect compliment to any race car, hot rod, or restoration.
Package: Including all items in the picture.
Note: Professional Installation is Highly Recommended.

• This is a Set of Brand New Stock Replacement Lower Control Arms with Ball Joints, Bushings, Shafts, & Upper Bumpers
• The lower bushings mount in stock locations & ball joints fit in stock spindles
• Fit for 1967-1969 Chevy Camaro, 1967-1969 Pontiac Firebird, 1968-1974 Chevy II / Nova
• Fit for 1971-1974 Pontiac Ventura,1973-1974 Buick Apollo, 1973-1974 Oldsmobile Omega
• Comes as pictured

Application:
--1968-1972 Chevelle, Malibu, Monte Carlo and El Camino
--1968-1972 Lemans, Grand Am, Grand Lemans, GTO, T37 and Tempest
--1969-1972 Grand Prix
--1970-1972 Sprint Trucks
--1968-1972 4-4-2, Cutlass, Calais, F85 and Vista Cruiser
--1968-1972 Skylark, Century, Special, Luxus and Regal
--This auction is for a set of lower heavy duty tubular control arms.They are significantly stronger than stock.
--Fit any A Body GM car
--Suspension geometry is improved over stock by increasing camber gain and improving roll camber. These control arms are redesigned for better steering and suspension.
--They utilize bleeding-edge manufacturing processes which include mandrel bends and precision cnc welding.
--The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.
--They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements
--The tubular lower control arms replace stock lower control arms.
--Lower arms are 1.625" OD - .156" DOM Tubing.And are Set at Stock Caster
--The conventional lower coil spring pocket features a stamped steel pocket with a positive spring locating feature and nutserts for the shock lower attachment.

Application:
--1968-1972 Chevelle, Malibu, Monte Carlo and El Camino
--1968-1972 Lemans, Grand Am, Grand Lemans, GTO, T37 and Tempest
--1969-1972 Grand Prix
--1970-1972 Sprint Trucks
--1968-1972 4-4-2, Cutlass, Calais, F85 and Vista Cruiser
--1968-1972 Skylark, Century, Special, Luxus and Regal

--This listing is for a set of upper heavy duty tubular control arms.They are significantly stronger than stock.
--Fit any A Body GM car
--Suspension geometry is improved over stock by increasing camber gain and improving roll camber. These control arms are redesigned for better steering and suspension.
--They utilize bleeding-edge manufacturing processes which include mandrel bends and precision cnc welding.
--The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.
--They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements
--The upper control arms also utilize greaseable bushings which make for increased stiffness over stock to provide more consistent and precise handling.
--Upper arms are 1.125" OD - .125" Wall Tubing.And have 4* Positive Caster.

--Fitment:

1964-1972 Chevelle, Malibu, Monte Carlo and El Camino

1964-1972 Lemans, Grand Am, Grand Lemans, GTO, T37 and Tempest

1969-1972 Grand Prix

1970-1972 Sprint Trucks

1966-1972 4-4-2, Cutlass, Calais, F85 and Vista Cruiser

1964-1972 Skylark, Century, Special, Luxus and Regal

--This auction is for a set of upper and lower heavy duty tubular control arms. They are significantly stronger than stock.

--Fit any A Body GM car

--Suspension geometry is improved over stock by increasing camber gain and improving roll camber.

--These control arms are redesigned for better steering and suspension.

--They utilize bleeding-edge manufacturing processes which include mandrel bends and precision cnc welding.

--The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.

--They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements

--The upper control arms also utilize greaseable bushings which make for increased stiffness over stock to provide more consistent and precise handling.

--The tubular lower control arms replace stock lower control arms.

--Upper arms are 1.125" OD - .125" Wall Tubing. And have 4* Positive Caster.

--Lower arms are 1.625" OD - .156" DOM Tubing. And are Set at Stock Caster

--The conventional lower coil spring pocket features a stamped steel pocket with a positive spring locating feature and nutserts for the shock lower attachment.

Note: Professional Installation is Highly Recommended.

Application:
--1964-1972 Chevelle, Malibu, Monte Carlo and El Camino
--1964-1972 Lemans, Grand Am, Grand Lemans, GTO, T37 and Tempest
--1969-1972 Grand Prix
--1970-1972 Sprint Trucks
--1966-1972 4-4-2, Cutlass, Calais, F85 and Vista Cruiser
--1964-1972 Skylark, Century, Special, Luxus and Regal
Discription:
--This listing is for a set of upper heavy duty tubular control arms.They are significantly stronger than stock.
--Fit any A Body GM car
--Suspension geometry is improved over stock by increasing camber gain and improving roll camber.
--These control arms are redesigned for better steering and suspension.
--They utilize bleeding-edge manufacturing processes which include mandrel bends and precision cnc welding.
--The highest quality DOM steel tubing has been used for their construction and have a chip and scratch resistant powdercoated finish.
--They require no modification to the body or frame of your vehicle, they are complete bolt-in replacements
--The upper control arms also utilize greaseable bushings which make for increased stiffness over stock to provide more consistent and precise handling.
--The tubular lower control arms replace stock lower control arms.
--Upper arms are 1.125" OD - .125" Wall Tubing.And have 4* Positive Caster.

--Designed for 1955-57 Chevy Belair - 150 - 210

--Suspension geometry is improved

--Urethane bump stops to provide ball joint protection at full drop

--These arms are stronger than the Factory Control arms

--The special cam plugs will allow for more caster adjustment. Gives vehicle a higher speed stability.

--Modification is not required for installation.

--These arms will work with stock coil springs & coil overs.

--For a bind free operation there is low drag and self lubricating properties

 

--Complete Factory replacement

--Modifications Required: No

--Control Arm Material: DOM Tubing

--Upper Cross Shafts Included. Improved Positive Caster

--Control Arm Finish: Black Powder Coated

--Package: Including all items in the picture.

Note: Professional Installation is Highly Recommended.

Description:
Application:
1964-1967 Chevelle, Malibu, Monte Carlo and El Camino
1964-1967 Skylark, Century, Special, Luxus and Regal
1966-1967 4-4-2, Cutlass, Calais, F85 and Vista Cruiser
1964-1967 Lemans, Grand Am, Grand Lemans, GTO, T37 and Tempest,
These control arms are jig made from heavy duty Steel for long lasting abuse.
These control arms are a Fully Assembled, complete set ready to bolt on and include all ball joints and bump stops.
These control arms will work with stock coil springs.
COMPLETE SET OF 4 -- 2 Uppers -- 2 LOWERS --- Fully Assembled
Lower Control arms are 1.625" OD - .156 wall tubing
Upper Control arms are 1.125" OD - .125 DOM tubing
Package: Including all items in the picture.
Note: Professional Installation is Highly Recommended.

Description
This is a Set of Brand New Stock Replacement Upper Control Arms with Ball Joints, Bushings, Shafts, & Upper Bumpers.
These arms are exact reproductions of the original control arms on the applications listed below.
The upper shafts in stock locations & ball joints fit in stock spindles.
The upper arms weigh approximately 9.5 lbs each with everything installed.
Keeping the factory specs and adding modern fabrication, these arms are perfect for any restoration.
Applications:
1967-1969 Chevy Camaro
1967-1969 Pontiac Firebird
1968-1974 Chevy II / Nova
1971-1974 Pontiac Ventura
1973-1974 Buick Apollo
1973-1974 Oldsmobile Omega