For Ford 289/302w 8000 Series Pro Billet Magnetic Pickup Distributor

The spark plug type terminals offer secure wire attachment.
This combination yields stable timing and spark delivery at any RPM.
Billet Housing:
Pro Billet feture a distributor housing machined from billet 6061-T6 aluminum.
Shaft and Ball Bearing Guide:
To accurately guide this shaft,It uses a sealed ball bearing located at the top of the housing.
At the bottom of the housing, an extra long sintered bushing controls the shaft.
This combination keeps the shaft spinning smooth and accurately throughout 10,000+ rpm.
Magnetic Pickup:
All of the Distributors use a high output magnetic pickup to trigger the ignition system.
This pickup is completely maintenance free requiring no adjustment ever.
The pickup is mounted to the base of the distributor housing and plugs directly into your Ignition Control.
A trigger signal is created as a precision made reluctor (attached to the shaft) passes by.
The reluctor has a "paddle" for each cylinder and when the paddle passes the pickup, a signal is created.
Adjustable Mechanical Advance:
One of the most important features of the Distributors is the adjustable mechanical advance assembly.
The advance assembly allows you to accurately modify the advance curve to match your specific application.
To start with, the advance plate is stamped and machined from chrome moly, weight pins are then staked in and tig welded in place.
This assembly, along with the weights, then receive a corrosion resistant QPQ coating.

PLEASE NOTE!
Installation: All Billet Distributors must be used with an?SD 6A, 6AL, Ignition Control and Coil.
Only the Pro-Billet Ready-to-Run and Pro-Billet HEI Chevrolet models can be used without an Ignition.
Professional Installation is Highly Recommended (No Instruction and Wiring Diagram Included)