Disc Drum Brake Proportioning & In Line Front Rear Residual Valve Kit Street Rod

Description:

PROPORTIONING VALVE

--This is a good way to properly balance your brake system to ensure sufficient braking pressure.

--Brake line ports are 1/2" and 7/16"

--This is a new CPP proportioning (combination) valve for front disc & rear drum brake applications. Works on almost any Chevy or Ford street rod, classic truck, or muscle car with front disc and rear drum brakes.

--This is a brand new Delco style prop valve with built-in low pressure switch. Can be frame or firewall mounted. Fits most OEM dual-reservoir type master cylinders . This is the perfect time to replace your worn out original.

2 LBS POUND RESIDUAL VALVE

--This valve can be used with any DISK brake application as long as the master cylinder is located under the floor.

--Brand new 2 pound residual pressure valve in blue.

--When the master cylinder is under the floor, it is usually lower than the calipers. Gravity and vibration can cause brake fluid to leak back to the master cylinder away from the calipers, causing a loss of brake pressure. This valve acts as a one way check that prevents this type of bleeding. Without it, your brakes could drag or give out completely. This valve is necessary to your brake system .

10 LBS POUND RESIDUAL VALVE

--This valve can be used with any DISK brake application as long as the master cylinder is located under the floor.

--Brand new 10 pound residual pressure valve in red.

--When the master cylinder is under the floor, it is usually lower than the calipers. Gravity and vibration can cause brake fluid to leak back to the master cylinder away from the calipers, causing a loss of brake pressure. This valve acts as a one way check that prevents this type of bleeding. Without it, your brakes could drag or give out completely. This valve is necessary to your brake system

Note:Professional Installation is Highly Recommended (No Instruction Included)