15 Gallon OEM Fuel Cell Gas Tank (Black) + 20 Feet 10-AN Braided Oil Fuel Gas Line

15 Gallon OEM Fuel Cell Tank Polished Aluminum 20"(L) x 18"(W) x 10"(H) Black
Application:Universal styleDescription:--This fuel tank or Fuel Cell is made out of T6061 aluminum 11 gauge flat sheet metal with a rear sump & two welded in -10 AN fittings with a slosh foam insert & four welded corner tabs. These fuel cells are constructed for racing & off road use.--This is a 15 gallon fuel cell--Polished aluminum --With 4 mounting tabs--Include sending unit--Dimension:20"(L) x 18"(W) x 10"(H)--With 10 AN fittings--Includes Anti-slosh foam

20 Feet 10-AN Braided Stainless Steel Turbo Oil Fuel Gas Line Hose 1500 PSI
This hose is made to resist extreme heat, abrasion and corrosion. It offers superior flexibility & bending with maximum vacuum service.

Material:* Inner hose: CPE synthetic rubber.* The middle layer: 308 stainless steel wire mesh sleeve.* The outer layer: High quality braided nylon.

How to Cut:For cutting your new steel braided hose to length you will need:* Cutting wheel/ hack saw/ or steel braided hose cutters* Duct tape or electrical tape (work best)1. Measure your hose and find desired length.2. Tape hose at measured length needed for application.3. Cut hose threw the tape you have placed. (This keep the steel braid from fraying.)4. Remove the tape.5. Slide one end of hose into end of fitting.6. Insert the other half of fitting into the hose and begin to push and screw the fitting together.7. Make sure all connection are tight.

TECHNICAL NOTES
Professional Installation is Highly Recommended (No Instruction and Wiring Diagram Included)