8" Brake Booster Description: --The universal booster will bolt up to most street rods, hot rods, and many other vehicles with out a problem. It also offers approximately 20% (some say up to 27%) more stopping power than 8" single diaphragm boosters. --Master cylinder mounting bolts center to center 3 3/8 inch --4 bolt firewall or pedal assembly mounting center center 3 3/8 inch --Deep zinc finish gives it that show-car look that is guaranteed to catch the eye of the most discriminating enthusiasts
Master Cylinder Application: --Fit most GM application.This is Corvette style Description: --Cast iron coated body,dual ball zinc cap --With a 1" bore --The cap is attached by 2 small screws --4 port unit,so you can mount your lines on either side --With 3/8" fitting --will work with any drum/drum, disc/drum or disc/disc setup --Plugs are included to block the ports
1949-1954 Chevy Mount Brake Pedal Assembly Application: Fits CHEVY CARS 1949 1950 1951 1952 1953 1954; FITS WITH SB & BB CHEVY 216 235 265 283 305 327 350 383 400 396 454 572 502 SBC BBC Description: --Mounts brake booster and/or master cylinder to the frame --Works with all aftermarket 7" & 8" single & dual diaphragm boosters with gm style master cylinders Can be used with booster/master cylinder combo or just the gm style master cylinder --Pedal arm has a pre drilled 7/16" hole for pedal pad --This unit is paintable (it is zinc coated as pictured) --Fits chevy fleetline, bel air, master deluxe, hot rod, street rod, rat rod, etc. --For use with automatic transmission only --Will not work in conjunction with factory clutch pedal --All hardware is included as pictured Note?Professional Installation is Highly Recommended (No Instruction Included)
